| PART |
Description |
Maker |
| TDF8599A-15 TDF8599ATH |
I2C-bus controlled dual channel 135W/4 Ohm, single channel 250W/2 Ohm class-D power amplifier with load diagnostics
I2C-bus controlled dual channel 135 W/4 ? single channel 250 W/2 ?class-D power amplifier with load diagnostics
|
NXP Semiconductors
|
| LA4581 LA4581MB |
Oscillator; Frequency:75MHz; Frequency Tolerance: /-50ppm; Load Capacitance:15pF; Supply Voltage:3.3V; Crystal Terminals:Surface Mount (SMD, SMT)
Preamplifier Power Amplifier for 3V Headphone Stereos
Preamplifier Power Amplifier for 3V Headphone Stereos
|
Sanyo Electric Co.,Ltd.
SANYO[Sanyo Semicon Device]
|
| NCP45520 |
NCP45520 & NCP45521 Datasheet - ecoSWITCH Advanced Load Management: 11.5A Integrated Load Switch w/ Ultra-Low R<sub>ON</sub>, V<sub>IN</sub> Range= 0.5V-13.5V, Power Good Out or Adj. Slew Rate, Adj. Discharge, & Fault Protection
|
ON Semiconductor
|
| TDA8946 |
2 x 15 W stereo Bridge Tied Load BTL audio amplifier
|
NXP Semiconductors
|
| ISL6622A ISL6610 ISL6610A ISL6612 ISL6612A ISL6614 |
VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring
|
Intersil Corporation
|
| ISL6334AR5368 ISL6334AIRZ-TR5368 ISL6334ACRZ-TR536 |
VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring Features
|
Intersil Corporation
|
| NCP45540 |
NCP45540 Datasheet - ecoSWITCH™ Advanced Load Management: 18 A Controlled Load Switch with Low R<sub>ON</sub>
|
ON Semiconductor
|
| AQY221R2SX AQY221R2SZ |
PhotoMOS relay, RF (radio frequency). 1 form A, R 10 type. Output rating: load voltage 40 V, load current 250 mA.
|
Matsushita Electric Works(Nais)
|
| FSB147HNY |
Meets 2013 ErP Standby Power Regulation (Less than 0.5 W Consumption with 0.25 W Load) for ATX Power and LCD TV Power
|
List of Unclassifed Manufacturers
|
| DI-122 |
13 W (17.2 W Peak) Non-Isolated Power Supply for White Goods: <150 mW No-load Power Consumption
|
POWERINT[Power Integrations, Inc.]
|
